Built to Last - Stainless Steel Bottoms Prevent Corrosion
NSF & UL/ETL Listed
Exclusive Digital Thermostats Make Hitting Your Optimal Temp a
Poured Urethane makes them Lighter and More Durable
Thick Insulation Helps Keep Proper Temperature on Hot Days
Best Wheels in the Business - 8" Natural Rubber Wheels Easily
Handle Toughest Terrain
Umbrellas or Canopy's Available
Digital Thermostat on the CLT-6
ice cream cart
makes it easy to hit your target temperature. Simply set the target temp
just the way you would an air conditioner thermostat and watch it work
its way toward it.
MODEL CLT-6 PICTURED
carts are built and configured as ice cream carts or Italian ice carts,
or water ice carts, you can be sure you are getting a quality piece of
equipment made in the USA. These carts are build from the ground up and
the refrigeration is built specifically to take the beating that a cart
will eventually take. We do not start with a cheap store freezer and try
to modify for outdoor use.
For only $468 more, a gravity feed dip-well can
be added to this cart. See pictures of the gravity feed dip well toward
the bottom of this page.
SEE SPECS BELOW AND DRAWINGS WITH
DIMENSIONS BELOW THE SPECS - no assembly is required
Capacity 5 cu. ft.
Approx 500 Novelties
1/3 h. p. compressor
115 volts, 8 amps
Capacity 8 cu. ft.
Approx 800 novelties
1/3 hp 404a refrigerant
115 volts, 8 amps
Capacity 12.5 cu. ft.
Approx 1250 Novelties
1/3 h. p. Compressor
115 v., 8 amps
Lid locks standard on all models.
Top to be 18 ga. type 304 stainless steel, standard. Optional solid
Base frame to be welded aluminum.
All exposed corners welded and polished smooth.
Finished exterior standard in white pre-paint steel. Optional Lexan
panels at additional charge.
Wheels to be 6" or 8" diameter (2) swivel w/locks, (2) rigid. Load
rating of wheel to be a minimum of 350 lbs. each.
Interior of cart to be 24 ga. stainless steel, standard.
Bottom drain installed for defrost.
Condensing unit mounted on glide out base with service valves.
Carts to have 5 year limited warranty against insulation failure or
internal tubing leaks.
Carts to be ETL listed for outdoor use.
CLT-6 DRAWING BELOW
ravity Feed Dip Well System Pictured below - Only $468 - easy to attach
and remove depending on needs
Gravity Feed Dip Well Picture above on CLT-6
cart - Picture is from Server Side. Customer sees stainless steel on
Self Contained Mobile Hand Washing Sink
Below - See Special Pricing above
SPECS FOR NSF APPROVED MOBILE CART SINK
Constructed of 18 and 22 gauge type 304 stainless steel.
Requires 120/1/60 electrical outlet 15 amp circuit.
Sink bowl 21 gauge S.S. 11.5" Diameter x 5 1/4" deep.
Chrome 4" lavatory faucet with crystal handles.
Sink drain (1.5" Dia.) with strainer & stopper.
Ariston water heater Model GL2.5, 2.5 gal. capacity 110/1/60 12.5 fl a.,
1500 watt/12 amps. (UL, CSA compliant).
Shurflo series 8000 diaphragm pump, 115/1/60, .61 fla,
1.7 gpm free flow, w/pressure shutoff, .5 amp (NSF, UL).
Optional Flojet pump 12/1/60, .5 fl a, .8 gpm., .6 amps (NSF).
Supply tank with fill port & overflow-6 gal. nominal capacity.
Waste tank with overflow & drain-9 gal. nominal capacity.
Casters - 4" swivel with brake.
Optional quick coupling fill valve.
CLT-4 No Refrigeration Cart Video - Italian Ice
Cold Plate Refrigerated Cart BDC-8